Volador II Description:<\/strong>
\nWe are pleased to announce the second version of our 5\u201d frame, Volador II. Thanks to the numerous suggestions and feedback (special shoutout to Ryan Harell and Kai Lin) from V1 users and testers, we\u2019ve made many optimizations in the V2 version to better suit the needs of pilots.<\/p>\nThe Volador II Frame maintains high compatibility and a simple construction design, equipped with the necessary accessories for easy, convenient, and organized assembly.<\/p>\n
The Volador II VX Frame comes in the Squashed X configuration for maximum control, while the Volador II VD Frame features the popular Deadcat style configuration with no props in view. It is compatible with a variety of analog and HD systems on the market, and the independently detachable arm and tight-fitting structure design minimize frame resonance. The high-quality TPU parts are cleverly designed for a more integrated and neat installation. We guarantee, that pilots with the Obsessive-Compulsive Disorder of any degree will be highly satisfied as Volador II is the only frame on the market that allows users to have the cleanest looking builds possible.<\/p>\n
We have also designed a silicone shock-absorbing camera plate insert specifically for the DJI O3 Air Unit camera installation, that\u2019ll eliminate any possible jello in your DVR, while also being compatible with 19mm\/20mm format cameras.
\nThe frame is made of high-strength CNC aluminum alloy parts and highest quality T700 carbon fiber sheets, with a super smooth surface and uniform chamfered edges. Say no to damaged cables and battery straps. And, well, it just looks aesthetically more pleasing, doesn\u2019t it?<\/p>\n
The redesigned battery pad with an added grid has now an even better anti-slip effect and is using a stronger adhesive. The XT60 connector integrated at the tail of the frame eliminates the probability of the power lead getting damaged by props in a crash, while allowing easy, single hand plugging of the battery.<\/p>\n
The frame comes with all the accessories needed for analog and HD builds, and is equipped with hardware with Loctite threadlocking agent for an additional reliability. The tight structure design fully minimizes resonance.<\/p>\n
Great efforts have been made on the TPU parts. They fit the frame perfectly, improve the overall durability of the frame, look very smooth and, oh my, the Tropical Mix Set is just out of this world! This is something we take a lot of pride in!<\/p>\n
V2 Features:<\/strong>
\nHigh-end T700 carbon fiber
\nTight structure design minimizes resonance
\nThe new CNC aluminum camera plates effectively protect the camera
\nThe silicone shock-absorbers for the O3 AU eliminate jello
\nIntegrated XT60 connector for safety and reliability
\nHigh-quality TPU parts
\nInnovative anti-slip battery pads
\nNew motor wire protection tubes
\nCompatible with both 19\/20mm cameras
\nEquipped with all accessories needed for analog and HD builds
\n12.9-grade strength hardware with Loctite threadlocker pre-applied
\nHigh electronics compatibility<\/p>\nV1 to V2 notable differences:<\/strong>
\nThe frame is now significantly lighter.
\nThe new CNC side plate is lighter and perfectly fits the DJI O3 AU camera.
\nThe new battery anti-slip pad is more \u201csticky\u201d and has better adhesion.
\nAdded keystone to even further reduce arm vibration.
\nAdded bottom screw gasket.
\nAdded motor wire protection tubes.
\nThe four middle screws on the top plate are now countersunk and sit flush, to eliminate possible battery damage during crashes.
\nThe new TPU arm protectors are now lighter and allow for easier disassembly.
\nAll models now come with two types of TPU antenna mount (with or without GPS mount).
\nThe thickness of the bottom and middle plates has been adjusted to 2.5mm.
\nThe connection structure between the arm and the clamp plate is slightly adjusted to distribute stress better.
\nXT60 plug cutout on the top plate is now symmetrical, allowing installation of the XT60 in both orientations.<\/p>\nVD5 Specifications:<\/strong>
\nArm Thickness: 6mm
\nTop plate thickness: 2.5mm
\nMiddle plate thickness: 2.5mm
\nBottom plate thickness: 2.5mm
\nKeystone thickness:5mm
\nSide plate thickness:2mm
\nCNC Side plate thickness:5mm
\nPropeller size: 5~5.1 inch
\nMaterial: T700 carbon plate
\nFPV cam spacing: 19mm\/20mm
\nWeight: 186.4g(with TPU parts)
\nColour: Black\/Tropical Mix\/Yellow\u00a0 (Optional)
\nTotal Dimensions:190mm*136mm Wheelbase:225mm
\nStack mounting holes: 20mm*20mm\/30.5mm*30.5mm(M3)
\nVTX mounting holes: 20mm*20mm\/25.5mm*25.5mm(M2)<\/p>\nVD5\/VD6 II Manual Detail<\/p>\n
<\/p>\n
<\/div>\n
![\"\"](\"https:\/\/pilotradi.com\/wp-content\/uploads\/2025\/04\/1_b2a61a8a-1f35-40cf-8011-3e49a49a7b22-300x300.webp\")
![\"\"](\"https:\/\/pilotradi.com\/wp-content\/uploads\/2025\/04\/4_4b938a30-07aa-4665-ad3b-49a926cb3403-300x300.webp\")
![\"\"](\"https:\/\/pilotradi.com\/wp-content\/uploads\/2025\/04\/Volador-_-VD5-O3-Deadcat-FPV-T700-Frame-Kit-4-300x300.webp\")
![\"\"](\"https:\/\/pilotradi.com\/wp-content\/uploads\/2025\/04\/Volador-_-VD5-O3-Deadcat-FPV-T700-Frame-Kit-7-300x300.webp\")
<\/p>\n