DeepSpace SEEKER5 DC 5inch FPV freestyle Frame Kit for DJI O4 PRO / O3 AIR UNIT

Produk Terkait

• Obral!

  
  Frame

  Frame Drone Race Zotar Krey Ultra 3.5 inch – Unibody, Merah trans

  Rp470.000 Harga aslinya adalah: Rp470.000.Rp450.000Harga saat ini adalah: Rp450.000.

  - Zotar Krey Ultra 3.5 inch - Pilihan Varian Unibody dan Non Unibody - Tebal arm 4mm - Bottom 2mm - top 2mm - interlock 2mm - Standoff M3x25mm Disarankan: Motor 3-4" 4S - 6S : https://pilotradi.com/index.php/produk/paket-lebaran-motor-f1408-2800kv-4-6s/ FC mini F7 20x20 :  https://pilotradi.com/index.php/produk/tmotor-mini-f7-mpu6000-fc-race-fpv-drone/ ESC A32bit 20x20 : https://pilotradi.com/index.php/produk/tmotor-f60a-8s-4in1-20x20-racing-esc-am32/ - 3D print set ( camera, Fin, RX antenna, dan VTX Antenna) - camera angle 50 degree - FC support 20x20 dan 25.5x25.5 ( tambahan 16x16 untuk yg Unibody) - Motor support jarak antar baut max 12mm

• 
  FC / ESC STACK, Frame, Motor, Power System

  Power System F7 50A Tmotor dan Speedybee Frame

  Rp2.850.000

  Pastikan pengalaman merakit anda menjadi hal yang indah tidak terlupakan.. anda bisa melhat bahasan tiap produk ini seperti Tmotor F7 SE yang sudah open lock semua fungsi ,  ESC 32bit 50A yang bisa birectional motor serta Tmotor Velox V3 mulai 1500kv sd 2050KV 6S baik 2207 maupun 2306 series
• Obral!

  
  Frame

  Volador II VD6 O4 Deadcat FPV T700 Frame Kit

  Rp1.550.000 Harga aslinya adalah: Rp1.550.000.Rp1.500.000Harga saat ini adalah: Rp1.500.000.

  Volador II Description:    Cek Ongkir disini : https://jet.co.id/rates We are pleased to announce the second version of our 6” frame, Volador II. Thanks to the numerous suggestions and feedback (special shoutout to Ryan Harell and Kai Lin) from V1 users and testers, we’ve made many optimizations in the V2 version to better suit the needs of pilots. The Volador II Frame maintains high compatibility and a simple construction design, equipped with the necessary accessories for easy, convenient, and organized assembly. The Volador II VX Frame comes in the Squashed X configuration for maximum control, while the Volador II VD Frame features the popular Deadcat style configuration with no props in view. It is compatible with a variety of analog and HD systems on the market, and the independently detachable arm and tight-fitting structure design minimize frame resonance. The high-quality TPU parts are cleverly designed for a more integrated and neat installation. We guarantee, that pilots with the Obsessive-Compulsive Disorder of any degree will be highly satisfied as Volador II is the only frame on the market that allows users to have the cleanest looking builds possible. We have also designed a silicone shock-absorbing camera plate insert specifically for the DJI O4 Air Unit camera installation, that’ll eliminate any possible jello in your DVR, while also being compatible with 19mm/20mm format cameras. The frame is made of high-strength CNC aluminum alloy parts and highest quality T700 carbon fiber sheets, with a super smooth surface and uniform chamfered edges. Say no to damaged cables and battery straps. And, well, it just looks aesthetically more pleasing, doesn’t it? The redesigned battery pad with an added grid has now an even better anti-slip effect and is using a stronger adhesive. The XT60 connector integrated at the tail of the frame eliminates the probability of the power lead getting damaged by props in a crash, while allowing easy, single hand plugging of the battery. The frame comes with all the accessories needed for analog and HD builds, and is equipped with hardware with Loctite threadlocking agent for an additional reliability. The tight structure design fully minimizes resonance. Great efforts have been made on the TPU parts. They fit the frame perfectly, improve the overall durability of the frame, look very smooth and, oh my, the Tropical Mix Set is just out of this world! This is something we take a lot of pride in! V2 Features: High-end T700 carbon fiber Tight structure design minimizes resonance The new CNC aluminum camera plates effectively protect the camera The silicone shock-absorbers for the O4 AU eliminate jello Integrated XT60 connector for safety and reliability High-quality TPU parts Innovative anti-slip battery pads New motor wire protection tubes Compatible with both 19/20mm cameras Equipped with all accessories needed for analog and HD builds 12.9-grade strength hardware with Loctite threadlocker pre-applied High electronics compatibility V1 to V2 notable differences: The frame is now significantly lighter. The new CNC side plate is lighter and perfectly fits the DJI O4 AU camera. The new battery anti-slip pad is more “sticky” and has better adhesion. Added keystone to even further reduce arm vibration. Added bottom screw gasket. Added motor wire protection tubes. The four middle screws on the top plate are now countersunk and sit flush, to eliminate possible battery damage during crashes. The new TPU arm protectors are now lighter and allow for easier disassembly. All models now come with two types of TPU antenna mount (with or without GPS mount). The thickness of the bottom and middle plates has been adjusted to 2.5mm. The connection structure between the arm and the clamp plate is slightly adjusted to distribute stress better. XT60 plug cutout on the top plate is now symmetrical, allowing installation of the XT60 in both orientations. VD6 Specifications: Arm Thickness: 6mm Top plate thickness: 2.5mm Middle plate thickness: 2.5mm Bottom plate thickness: 2.5mm Keystone thickness:5mm Side plate thickness:2mm CNC Side plate thickness:5mm Propeller size: 6~6.1 inch Material: T700 carbon plate FPV cam spacing: 19mm/20mm Weight: 200g(with TPU parts) Colour: Black/Tropical Mix (Optional) Total Dimensions:259mm*109mm Wheelbase:260mm Stack mounting holes: 20mm*20mm/30.5mm*30.5mm(M3) VTX mounting holes: 20mm*20mm/25.5mm*25.5mm(M2) Includes: 1x Volador II VD6 Frame Kit Recomended FC ESC : T-Hobby Velox Stack FC F7 SE 50A Analog/HD - PilotRADI
• Obral!

  
  Frame

  Axisflying MANTA5″ / 5inch fpv freestyle Squashed X frame kit

  Rp639.000 Harga aslinya adalah: Rp639.000.Rp607.000Harga saat ini adalah: Rp607.000.

  Frame Drone 5inch dengan opsi mounting tambahan bisa di cetak sendiri, file stl 3D bisa di download Frame Axisflyng Xtrue ini sangat cocok buat latihan freestyle drone 5inch  selain kuat juga sangat stabil dalam gerakan, Disarankan: T-Hobby Stack FC F7 50A32bit ESC : T-Hobby Velox Stack FC F7 SE 50A Analog/HD - PilotRADI T-Hobby Motor 2207 1750KV 4-S : T-Hobby Velox 2207 V3 1750KV 4s-6s 5/6 inch drone FPV - PilotRADI